24mm Solenoid Valve Operating Magnet
Suitable for all makes of Solenoid Valves.
WARNING: Do not re-energise the electrically operated valve coil unless it is correctly seated on the valve stem. otherwise this will cause the coil to burn out.
PLEASE NOTE: Customisation options are only available on sizes 10mm, 15mm, and 18mm.
Designed to convert electrically operated solenoid valves in to hand-operated valves to enable service engineers to operate valves manually. Operates by magnetically lifting the stem assembly and plunger to actuate the valve during service. Use the Solenoid Valve Operating Magnet to test, troubleshoot, or manually activate and control a direct connected or pilot operated 2-way solenoid, 3-way reclaim or 4-way reversing valve.
Instructions for Use
- Ensure that power is switched off before removing the electrically operated valve coil.
- Place the Solenoid Valve Operating Magnet fully over the valve-stem.
- You will hear a ‘click’, this indicates the valve is now open. If you don’t hear a click, invert the magnet and repeat (as above).
- When the manual operation is complete, remove the Solenoid Valve Operating Magnet and reinstate the electrically operated valve coil to resume normal operation.
Technical Specification – SVOM 24
Casing: Ø41mm injection moulded ABS Magnetic strength 40000 Gauss flux density.
Unit consists of three separate N42 (NdFeB) Neodymium magnets.
Customise your Solenoid Valve Operating Magnet
Create a customised Solenoid Valve Operating Magnet with your branding for retail sales or for use by your own company workforce. The Fridgenius Solenoid Valve Operating Magnet can be produced in any colour and can be printed with your company logo. For any branding and customisation requests please get in touch below.
Other Solenoid Valve Operating Magnets
Fridgenius supplies a range of solenoid valve operating magnet sizes for use in refrigeration, air conditioning, water, oil, gas, and fuel installations.
Frequently Asked Questions
Here’s a few questions we usually get asked. If you have a question that isn’t visble here, feel free to get in touch with us.
Can they be used to open and close Solenoid Valves without power?
Yes, The Solenoid Valve Operating Magnet can operate a solenoid valve without power. It replaces the solenoid coil and operates without electrical power, enabling manual operation.
What sizes are available?
Are there any regulatory requirements when using a Solenoid Valve Operating Magnet?
There are no regulatory requirements when using a Solenoid Valve Operating Magnet.
Talk to Fridgenius today
If you would like to know more about us, our products, how to become a Distributor or find out where to purchase our products, please contact us and we’ll be happy to help with your enquiry.